|
|
|
|
Wrought Iron Fences
|
$0.95
|
|
|
|
|
|
|
|
Item Description
|
An assortment of fences that can be stuck into foam bases to make a fence. |
Base Object
Included Files:
BaseGeo/Fence35_5mm.stl BaseGeo/Fence75mm.stl BaseGeo/Pillar.stl
PrintVariation1 FDM
Notes
- Assembly required.
- Recommended to print at high resolution for smooth results.
- For best results, this print will require you to have a well calibrated first layer to prevent peices from printing too flat.
- Print flat on bed with no raft so both sides have a flat mating surface when glueing together.
Minimum Required Bed Size: X: 48mm Y: 48mm Z: 75mm |
Included Files:
PrintVariation1_FDM/Fence35_5mm/Fence35_5mm.Part_1.stl
PrintVariation1_FDM/Fence35_5mm/Fence35_5mm.Part_2.stl
PrintVariation1_FDM/Fence75mm/Fence75mm.Part_1.stl
PrintVariation1_FDM/Fence75mm/Fence75mm.Part_2.stl
PrintVariation1_FDM/Pillar/Pillar.Part_1.stl
PrintVariation1_FDM/Pillar/Pillar.Part_2.stl
PrintVariation2 SLA
Notes
|
Minimum Required Bed Size: X: 75mm Y: 54mm Z: 93mm |
Included Files:
PrintVariation2_SLA/Fence35_5mm.SinglePart.stl
PrintVariation2_SLA/Fence75mm.SinglePart.stl
PrintVariation2_SLA/Pillar.SinglePart.stl
|
|
|
|
|
|
|
