|
|
|
|
Chained Crystal
|
$2.45
|
|
|
|
All Categories
Scenery
Monuments
| |
|
|
|
Item Description
A hovering magic crystal chained to some pillars.
This one comes in two pieces, the crystal and the pillars with chains. This way you can print the crystal seperately in a transparent material.
|
Base Object
Included Files:
BaseGeo/Crystal.stl
PrintVariation1 FDM
Notes
- Assembly required.
- Recommended to print at high resolution for smooth results.
- For best results, this print will require you to have a well calibrated first layer to prevent peices from printing too flat.
- Print flat on bed with no raft so both sides have a flat mating surface when glueing together.
Minimum Required Bed Size: X: 12mm Y: 85mm Z: 85mm |
Included Files:
PrintVariation1_FDM/Crystal/Crystal.Part_1.stl
PrintVariation1_FDM/Crystal/Crystal.Part_2.stl
PrintVariation1_FDM/Crystal/Crystal.Part_3.stl
PrintVariation1_FDM/Crystal/Crystal.Part_4.stl
PrintVariation1_FDM/Crystal/Crystal.Part_5.stl
PrintVariation1_FDM/Crystal/Crystal.Part_6.stl
PrintVariation1_FDM/Crystal/Crystal.Part_7.stl
PrintVariation1_FDM/Crystal/Crystal.Part_8.stl
PrintVariation2 SLA
Notes
- Pre Supported.
- Assembly required.
Minimum Required Bed Size: X: 18mm Y: 18mm Z: 70mm |
Included Files:
PrintVariation2_SLA/Crystal/Crystal.Part_1.stl
PrintVariation2_SLA/Crystal/Crystal.Part_2.stl
PrintVariation2_SLA/Crystal/Crystal.Part_3.stl
PrintVariation2_SLA/Crystal/Crystal.Part_4.stl
PrintVariation2_SLA/Crystal/Crystal.Part_5.stl
|
|
|
|
|
|
